Led Flashing Patterns - JCM GLOBAL UBA Pro RT Series Operation And Maintenance Manual

Installation

LED Flashing Patterns

The LED Color Pattern indications listed in Table 2-3 and Table 2-4 occur during various RT/RQ Unit
operating and error conditions.
NOTE: Refer to "LED Error Codes" on page A-1 for a detailed explanation of each error code.
Recycler LED
Operating
OFF
Operating
OFF
Error occurred in a Drum of the RT
ON
Transport side.
Error occurred in a Drum of the RQ
ON
Transport side.
Status LED
OFF
White ON
Green ON
White Flashes
Green Flashes
Magenta Flashes
P/N 960-000213R_Rev.A
UBA Pro RT/RQ™ Series Banknote Recycler
Table 2-3 Recycler and Transport LEDs Flashing Patterns
Cause and Solution
Table 2-4 Status LED Flashing Patterns
Cause and Solution
Stand-by (Test Mode)/Operating
or
Error occurred in the UBA Pro Unit
side. (Refer to "LED Error Codes" on
page A-1.)
Turning power on
Stand-by (Normal Mode)
Error occurred while turning power on.
Error occurred when the Unit was in
stand-by or while downloading
software to the Unit (Recycler).
Error occurred when Banknotes were
being collected.
Transport LED
Operating
OFF
Operating
OFF
Error occurred in the RT Transport side.
ON
Error occurred in the RQ Transport side.
ON
Status LED
Status LED
Cyan Flashes
Blue Flashes
Yellow Flashes
Red Flashes
↔
Green Red
Flashes
© 2020, JAPAN CASH MACHINE CO., LTD.
2 - 5
Section 2
Cause and Solution
Cause and Solution
Error occurred while a Banknote
was being dispensed.
Return the cash in the RT/RQ Unit.
Error occurred after a Banknote
was determined to dispense.
Return the cash to the customer.
Error occurred while a Banknote
was being accepted.
Return the cash to the customer.
Error occurred after a Banknote
was determined to accept.
Return the cash in the RT/RQ Unit.
Downloading software from
Acceptor Head Unit to Recycler.