Feed Motor Speed Reverse Rotation Test (Rt Transport); Flapper Motor Operation Time Test (Rt Transport) - JCM GLOBAL UBA Pro RT Series Operation And Maintenance Manual

Calibration and Testing
Feed Motor Speed Reverse Rotation Test (RT
Transport)
To perform the Feed Motor Speed Test in the
reverse rotation on the RT Transport side, proceed
as follows:
1. Ensure that the Recycler and Cash Box is prop-
erly installed.
2. Launch the Performance Test Program (see
page 6-7).
3. Select "
TWIN_FEED_MOTOR_REV_TEST
(Figure 6-39 a).
4. Click the " "
Start
39 b) to begin the Test.
Figure 6-39 Feed Motor Speed Reverse
b
a
Figure 6-39 Feed Motor Speed Reverse Rotation
Test (RT Transport) 1
5. The measured speed will appear in the "
Motor (RC-Twin)
Screen.
6. Confirm that the motor speed is in the acceptable
range: 600mm/sec to 900mm/sec.
7. Click the " "
Stop
40 b) to end the test.
Figure 6-40 Feed Motor Speed Reverse
b
a
Figure 6-40 Feed Motor Speed Reverse Rotation
Test (RT Transport) 2
P/N 960-000213R_Rev.A
UBA Pro RT/RQ™ Series Banknote Recycler
Screen Button (Figure 6-
RC-Feed
" area (Figure 6-40 a) on the
Screen Button (Figure 6-
Flapper Motor Operation Time Test (RT 
Transport)
To perform the Flapper Motor Operation Time Test
on the RT Transport side, proceed as follows:
1. Launch the Performance Test Program (see
page 6-7).
2. Select "
TWIN_FLAPPER_MOTOR_TEST
ure 6-41 a).
3. Click the "
41 b) to begin the Test.
"
Figure 6-41 Flapper Motor Operation Time Test
Figure 6-41 Flapper Motor Operation Time Test
(RT Transport) 1
4. The measured time will appear in the "
per (RC-Twin)
Screen.
5. Confirm that the operation time is in the accept-
able range: 300msec to 950msec.
6. Click the "
42 b) to end the test.
Figure 6-42 Flapper Motor Operation Time Test
Figure 6-42 Flapper Motor Operation Time Test
6 - 9
" Screen Button (Figure 6-
Start
b
a
" area (Figure 6-42 a) on the
" Screen Button (Figure 6-
Stop
b
a
(RT Transport) 2
© 2020, JAPAN CASH MACHINE CO., LTD.
Section 6
" (Fig-
RC-Flap-
Scroll