Front Transport Unit Removal - JCM GLOBAL UBA Pro RT Series Operation And Maintenance Manual

Section 4

Front Transport Unit Removal

To remove the Front Transport Unit out of the RQ
Frame Unit, proceed as follows:
1. Remove the two (2) E-rings (Figure 4-56
a ), the two (2) Gears (Figure 4-56
2
the two (2) Bearings (Figure 4-56
Figure 4-56 Front
c
b 1
1
a
1
Figure 4-56 Front Transport Unit Removal
(RQ Frame Unit) 1
2. Remove the four (4) Screws (Figure 4-57
through a ).
4
Figure 4-57 Front Transport Unit Removal (RQ
b
Figure 4-57 Front Transport Unit Removal
(RQ Frame Unit) 2
NOTE: For the reassembly, route the
Harness as illustrated in Figure 4-57b.
Ensure that the Harness doesn't get
pinched when opening the Front Transport
Unit.
P/N 960-000213R_Rev.A
UBA Pro RT/RQ™ Series Banknote Recycler
Figure 4-58 Front Transport Unit Removal (RQ
a &
1
b & b ) and
1 2
c & c ).
1 2
c
2
b
2
a
2
a
1
Figure 4-59 Front Transport Unit Removal (RQ
a
4
a
3
a
a
2
1
4 - 1 2
3. Feed the Harness (Figure 4-58 a) out through the
hole (Figure 4-58 b) to remove the Side Frame
Assy. (Figure 4-58 c).
Figure 4-58 Front Transport Unit Removal
(RQ Frame Unit) 3
4. Remove the BV Tray Assy. (Figure 4-59 a).
5. Feed the Harness (Figure 4-59 b) out through the
hole (Figure 4-59 c) to remove the Front Trans-
port Unit (Figure 4-59 d).
6. Remove the Rotary Guide (Figure 4-59 e).
f
c
a
Figure 4-59 Front Transport Unit Removal
(RQ Frame Unit) 4
NOTE: For the reassembly, route the
Harness as illustrated in Figure 4-59 f.
Ensure that the Harness doesn't get
pinched when opening the Front Transport
Unit.
© 2020, JAPAN CASH MACHINE CO., LTD.
Disassembly/Reassembly
b
a
c
e
d
b