Transport Board Removal; Cylinder Lock Removal; Key Plate Removal; Led Board Removal - JCM GLOBAL UBA Pro RT Series Operation And Maintenance Manual

Disassembly/Reassembly
5. Remove the single (1) Screw (Figure 4-17 b).
6. Remove the Flap Home Board (Figure 4-17 c).
Figure 4-17 Flap Home Board Removal (RT
c
Figure 4-17 Flap Home Board Removal
(RT Frame Unit) 3

Transport Board Removal

To remove the Transport Board, proceed as fol-
lows:
1. Release the single (1) Locking Tab (Figure 4-18
a) to remove the FPC Harness (Figure 4-18 b).
2. Unplug the three (3) Connectors (Figure 4-18
through c ).
3
3. Remove the two (2) Screws (Figure 4-18
d ).
2
4. Remove the Transport Board (Figure 4-18 e).

Figure 4-18 Transport Board Removal

d
1
a
b
Figure 4-18 Transport Board Removal

Cylinder Lock Removal

To remove the Cylinder Lock, proceed as follows:
1. Pull and remove the Cylinder Lock (Figure 4-19
a).
Figure 4-19 Cylinder RT
a

Figure 4-19 Cylinder Lock Removal

P/N 960-000213R_Rev.A
UBA Pro RT/RQ™ Series Banknote Recycler
a
b
d
1
d
2
e
c
1
c
2
c
3
RQ
a

Key Plate Removal

To remove the Key Plate, proceed as follows:
1. Remove the single (1) Screw (Figure 4-20 a) to
remove the Key Plate (Figure 4-20 b).
Figure 4-20 Key Plate
RT

Figure 4-20 Key Plate Removal

LED Board Removal

To remove the LED Board, proceed as follows:
1. Release the single (1) Locking Tab (Figure 4-21
a) and remove the LED Board (Figure 4-21 b).
2. Unplug the FPC Harness (Figure 4-21 c).
c
1
c

Figure 4-21 LED Board Removal

&
b
Figure 4-21 LED Board Removal

Front Transport Unit Removal

To remove the Front Transport Unit out of the RT
Frame Unit, proceed as follows:
1. Remove the two (2) E-rings (Figure 4-22
a ), the two (2) Gears (Figure 4-22
2
the two (2) Bearings (Figure 4-22
Figure 4-22 Front
c
1
b
1
a
1
Figure 4-22 Front Transport Unit Removal
© 2020, JAPAN CASH MACHINE CO., LTD.
4 - 5
a
b
RQ
a
b
1
c &
1
(RT Frame Unit) 1
Section 4
a
b
a &
1
& b ) and
2
c ).
2
c
2
b
2
a
2