Model Descriptions; Type Descriptions; Software Descriptions; Precautions - JCM GLOBAL UBA Pro RT Series Operation And Maintenance Manual

Section 1

Model Descriptions

Table 1-1 lists the RT/RQ Product Model
Number Descriptions.
Table 1-1 RT/RQ Product Model
Number Specifications
Model: UBA - 5 * 0 - (*) * * (*) - * *
o
N
(1)
(1) Model Name (UBA Pro RT/RQ Series)
Validation Sensor
(2)
5 = World Wide Type 1 (Standard)
6 = Reserved
Barcode Sensor Board (Optional)
(3)
0 = Upper only (Standard)
1 = Upper and Lower
Acceptor Head Unit Type
(4)
0 = Centering Type (Banknote Short Side: 62mm - 85mm)
1 = Reserved
(5) Input Section Unit (Optional)
None = Standard
Stacking Type
(6)
SH2 = Horizontal Down (82mm, SH2 Box)
SS = Vertical Down (85mm, Large Box)
(7) Cash Box Access
None = Front Access (Standard)
Recycler Type
(8)
RT = 1 Recycler (Twin Drums)
RQ = 2 Recyclers (Quad Drums)
*. Refer to the UBA Pro Series Universal Banknote Acceptor Operation and Mainte-
nance Manual for the UBA Pro Unit's details.
†. The acceptable Banknote width depends on the Cash Box. Refer to "Technical
Specifications" on page 1-7 for each Cash Box's acceptable Banknote size.

Type Descriptions

Table 1-2 lists the RT/RQ Type Number
Descriptions.
Table 1-2 RT/RQ Type Number Specifications
Type: * * * - * * - * * * * * * *
o
N
(1)(2)(3) (4)
Cash Box Capacity
(1)
4 = 400 notes, SH2 Box (New Banknote)
8 = 800 notes, Large Box, (New Banknote)
Cash Box Type
(2)
0 = Standard
Cash Box Handle
(3)
0 = Standard
Sub Board Type
0 = Reserved
(4)
1 = Reserved
2 = Sub Board 2 (RS232/Photo-Coupler Isolation/TTL/ccTalk/1 USB)
3 = Reserved
4 = Reserved
Acceptor Head Unit Cover
(5)
0 = Black (Standard)
Bezel
0 = No Bezel
1 = Black/2 Green LEDs (Bezel 85) (Standard Installation)
(6)
2 = Reserved
8 = Reserved
9 = Reserved
A = Reserved
B = Black/2 Blue LEDs (SU Installation)
*
Bezel Spacer
(7)
0 = No Bezel Spacer
1 = With Bezel Spacer
P/N 960-000213R_Rev.A
UBA Pro RT/RQ™ Series Banknote Recycler
(2)(3)(4) (5) (6) (7) (8)
*
†

(5)
(6)(7)(8)(9)(10)(11)(12)
Table 1-2 RT/RQ Type Number Specifications
Type: * * * - * * - * * * * * * *
o
N
(1)(2)(3) (4)
Optional Circuit Board
(8)
0 = Reserved
Interface Setting (Factory Default)
(9)
P = Photo-Coupler Isolation
R = RS232C
External Harness
(10)
0 = None
1 = Standard Harness (with power cord)
2 = USB I/F Harness (with power cord)
Cash Box Faster/Lock (Optional)
0 = None
(11)
1 = Thumb Twist Lock Fastener for the Cash Box
2 = Specified Locks for the Cash Box and Recycler Lock 
(specific customer)
Battery (For Recycler Detection)
(12)
0 = No Battery
1 = Battery Equipped
*. Small pieces of paper or receipts might accidentally be inserted into the UBA Pro
Unit. The Bezel Spacer makes the distance to the Sensor longer and the Sensor
may not detect such foreign objects. Also, small pieces of paper or receipts are dif-
ficult to detect and remove.
†. Refer to "SW1 and SW2 Configurations" on page 2-4 for details.

Software Descriptions

Table 1-3 lists the RT/RQ Software Number
Descriptions.
Table 1-3 RT/RQ Software Number Specifications
UBA-5**-(*)**(*)-RC-T/Q * * * - 0 * * - V * .**
o
N
(A)
(A) Software Model Name
(B) Country Code (Denomination)
(C) Interface Protocol Name
(D) Software Version
*. The Country Code is indicated by three (3) Alphabetical Characters following the
JIS Standard.

Precautions

Caution: User cautions should be
included in any user guides or manuals.
Figure 1-2 Precautionary Symbols
Type1
Figure 1-2 Precautionary Symbols
The Figure 1-2 symbols are defined as follows:
1. Do not insert a damaged or exhibited
(Type 1)
unfit condition Banknote; it may cause a jam
inside the unit.
NOTE: Refer to "Banknote Fitness
Requirements" on page 1-4.
2. Do not expose the unit to water. The unit
(Type 2)
contains several precision electronic devices that
can be damaged if water or any liquid is sprayed
or spilled into the unit.
© 2020, JAPAN CASH MACHINE CO., LTD.
1 - 2
General Information
(5) (6)(7)(8)(9)(10)(11)(12)
†
(B) (C) (D)
*
Type2 Type3