Rs232C Interface Connector Pin Assignments (Uba Pro Side) - JCM GLOBAL UBA Pro RT Series Operation And Maintenance Manual

Section 2

RS232C Interface Connector Pin Assignments (UBA Pro Side)

NOTE: The Interface setup is required. Refer to "Interface and Recycler Settings (Sub Board 2)" on
page 2-4 for the settings.
Pin No. Signal Name
1
2
3 M.RES
4 TXD
5
6 RXD
7
8
9
10
11
12
13 GND (I/F)
14 LED POWER
15
16
17
18 LED
19
20
*. I/O (input/output) is the terminal as viewed from the RT/RQ Unit's side.
P/N 960-000213R_Rev.A
UBA Pro RT/RQ™ Series Banknote Recycler
Table 2-7 RS232C Connector Pin Assignments (UBA Pro Side)
*
I/O
- -
- -
IN
OUT
- -
IN
NC -
NC -
NC -
NC -
- -
NC -
-
-
- -
NC -
- -
-
NC -
- -
Socket (UBA Pro Unit Side): DRA-20PC-FO (JAE)
Contact (UBA Pro Unit Side): D02-22-26P-10000 (JAE)
Socket (Frame Side): DRA-20SC-FO (JAE)
Contact (Frame Side): D02-22-26S-10000 (JAE)
Contact (Frame Side) Pin No.3, No.13: D02-22-22S-10000 (JAE)
Recommended Wires: Slit Wire UL1061 AWG #26
Reserved (For the UBA Pro Side)
Reserved (For the UBA Pro Side)
Acceptor Hard Reset Signal Line
Output Signal Line from Acceptor to Host
Reserved (For the UBA Pro Side)
Input Signal Line from Host to Acceptor
No Connection
No Connection
No Connection
No Connection
Reserved (For the UBA Pro Side)
No Connection
Interface Power Supply (RS232C 0V DC)
LED Indicator Power Supply Line (Anode)
Reserved (For the UBA Pro Side)
No Connection
Reserved (For the UBA Pro Side)
LED Indicator Control Line (Cathode)
No Connection
Reserved (For the UBA Pro Side)
2 - 8
Function
© 2020, JAPAN CASH MACHINE CO., LTD.
Installation