Calibration And Testing; Tool Requirements; Installation Procedures; Part 1 - Jcm Tool Suite Installation - JCM GLOBAL UBA Pro RT Series Operation And Maintenance Manual

6 CALIBRATION AND TESTING

This section provides Calibration and Performance
Testing instructions for the UBA Pro RT/RQ™
Series Banknote Recycler (RT/RQ).
This section contains the following information:
•

Tool Requirements

•

Installation Procedures

•
JCM Tool Suite Standard Edition Modes
•
Software Download
•
Calibration
•
Performance Test Using a PC
•
Performance Test without a PC
Tool Requirements
Figure 6-1 illustrates and identifies the tools and
equipment interconnects necessary to install and/or
download the Application Software, USB driver
and Software, to calibrate Sensors, and to perform
the Performance Test using a PC.
Figure 6-1 Tool and Harness Connections
c e
&
d
1
d
d
2
f
a) RT/RQ Unit
b) Power Supply
c) PC (OS: Windows
d) USB Cable 
) USB Type-A (PC Side) 
d
1
d ) USB Type-C (UBA Pro Side)
2
e) Application Software* 
(JCM Tool Suite Standard Edition)
f) Reference Paper (KS-101, Centering Type)
*. Containing USB Downloader, Sensor Calibration,
Performance Test programs and Utility Function.
NOTE: Do Not put too much
pressure on the USB
Connector to avoid the risk
of damage to the UBA Pro's
PCB.
Figure 6-1 Tool and Harness Connections
P/N 960-000213R_Rev.A
UBA Pro RT/RQ™ Series
Banknote Recycler
b
a
®
7/8/10)
(USB Driver Installed)
S e c t i o n 6
Installation Procedures
Perform the following steps to install the "
Suite Standard Edition
USB Drivers (Refer to Figure 6-1 for the necessary
Tool and Harness Connections ).

Part 1 - JCM Tool Suite Installation

NOTE: Uninstall the current version of the
JCM Tool Suite application software
installed on your PC before updating to a
newer version.
1. Copy the "
Application Software and extract on to the Desk-
top.
2. Double-click on "
Figure 6-2 JCM Tool Suite Installation 1
Figure 6-2 JCM Tool Suite Installation 1
3. The "
JCM Tool Suite Standard Edition - Install
Shield Wizard
appear.
4. Click the "
Figure 6-3 JCM Tool Suite Installation 2
Figure 6-3 JCM Tool Suite Installation 2
6 - 1
" Application Software and
JCMToolSuiteStandardEdition.zip
"(Figure 6-2 a).
Setup.exe
" Screen shown in Figure 6-3 will
" Button (Figure 6-3 a).
Next>
a
© 2020, JAPAN CASH MACHINE CO., LTD.
JCM Tool
"
a