Sponge Roller Assy. Removal (Drum 1 Side) - JCM GLOBAL UBA Pro RT Series Operation And Maintenance Manual

Section 4
Sponge Roller Assy. Removal (Drum 1
Side)
To remove the Sponge Roller Assy. from the Drum
1 Side, proceed as follows:
1. Remove the six (6) Screws (Figure 4-99
through a ) from the Rear Unit.
6
Figure 4-99 Sponge
a
a
3
2
a
1
Drum 1 Side
Figure 4-99 Sponge Roller Assy. Removal
(Drum 1 Side) 1
2. Pull the Course Guide (Figure 4-100 a) as illus-
trated by the Arrow
direction indicated by the Arrow
Figure 4-100 Sponge
①
a
Figure 4-100 Sponge Roller Assy. Removal
(Drum 1 Side) 2
3. Slide the Course 1 (Figure 4-101 a) as illustrated
until it stops.
Figure 4-101 Sponge
a
Figure 4-101 Sponge Roller Assy. Removal
(Drum 1 Side) 3
P/N 960-000213R_Rev.A
UBA Pro RT/RQ™ Series Banknote Recycler
a
1
a
a
4
, and then slide out in the
①
.
②
①
②
②
4. Remove the single (1) Spring (Figure 4-102 a).
5. Remove the single (1) E-ring (Figure 4-102 b)
and the single (1) Drum Guide RO (Figure 4-102
c).
6. Remove the five (5) Screws (Figure 4-102
through d
Figure 4-102 Sponge
d
1
d
b c
a
6
5
Figure 4-102 Sponge Roller Assy. Removal
7. Lift the Course 1 (Figure 4-103 a) up as illus-
trated.
8. Remove the single (1) Solenoid Link Plate Assy.
(Figure 4-103 b) and the single (1) Drum Guide
Roller (Figure 4-103 c).
Figure 4-103 Sponge
a
Figure 4-103 Sponge Roller Assy. Removal
9. Remove the single (1) Shaft (Figure 4-104 a).
10. Remove the two (2) Pulleys (Figure 4-104
b ), the single (1) Flapper R (Figure 4-104 c) and
2
the single (1) Flapper L (Figure 4-104 d) to
remove the Sponge Roller Assy. (Figure 4-104
e).
Figure 4-104 Sponge
c
e
b
1
b
2
Figure 4-104 Sponge Roller Assy. Removal
4 - 2 0
Disassembly/Reassembly
).
5
d
2
3
d
d
4
5
(Drum 1 Side) 4
c
(Drum 1 Side) 5
d
(Drum 1 Side) 6
© 2020, JAPAN CASH MACHINE CO., LTD.
d
1
a
b
b &
1
a