Connector Pin Assignments; Usb Interface Connector Pin Assignments (Uba Pro Side); Photo Coupler Interface Connector Pin Assignments (Uba Pro Side) - JCM GLOBAL UBA Pro RT Series Operation And Maintenance Manual

Section 2

Connector Pin Assignments

USB Interface Connector Pin Assignments (UBA Pro Side)

Table 2-5 USB Interface Connector Pin Assignments (UBA Pro Side)
Pin No. Signal Name
1
2
3 M.RES
4
5
6
7
8 Vbus
9 -DATA
10 +DATA
11
12 GND (USB)
13
14 LED POWER
15
16
17
18 LED -
19
20
*. I/O (input/output) is the terminal as viewed from the RT/RQ Unit's side.

Photo Coupler Interface Connector Pin Assignments (UBA Pro Side)

NOTE: The Interface setup is required. Refer to "Interface and Recycler Settings (Sub Board 2)" on
page 2-4 for the settings.
Table 2-6 Photo Coupler Interface Connector Pin Assignments (UBA Pro Side)
Pin No. Signal Name
1
2
3 M.RES
4 TXD
5
P/N 960-000213R_Rev.A
UBA Pro RT/RQ™ Series Banknote Recycler
*
I/O
- -
- -
IN
NC -
- -
NC -
NC -
IN
IN/OUT USB Communication Input/Output Signal Line
IN/OUT USB Communication Input/Output Signal Line
- -
-
NC -
-
- -
NC -
- -
-
NC -
- -
*
I/O
- -
- -
IN
OUT
- -
Socket (UBA Pro Unit Side): DRA-20PC-FO (JAE)
Contact (UBA Pro Unit Side): D02-22-26P-10000 (JAE)
Socket (Frame Side): DRA-20SC-FO (JAE)
Contact (Frame Side): D02-22-26S-10000 (JAE)
Contact (Frame Side) Pin No.3, No.13: D02-22-22S-10000 (JAE)
Recommended Wires: Slit Wire UL1061 AWG #26
Reserved (For the UBA Pro Side)
Reserved (For the UBA Pro Side)
Acceptor Reset Signal Line
No Connection
Reserved (For the UBA Pro Side)
No Connection
No Connection
USB Communication Vbus Signal Line (+5V DC)
Reserved (For the UBA Pro Side)
USB Communication Ground (0V DC)
No Connection
LED Drive Line (Anode)
Reserved (For the UBA Pro Side)
No Connection
Reserved (For the UBA Pro Side)
LED Drive Line (Cathode)
No Connection
Reserved (For the UBA Pro Side)
Socket (UBA Pro Unit Side): DRA-20PC-FO (JAE)
Contact (UBA Pro Unit Side): D02-22-26P-10000 (JAE)
Socket (Frame Side): DRA-20SC-FO (JAE)
Contact (Frame Side): D02-22-26S-10000 (JAE)
Contact (Frame Side) Pin No.3, No.13: D02-22-22S-10000 (JAE)
Recommended Wires: Slit Wire UL1061 AWG #26
Reserved (For the UBA Pro Side)
Reserved (For the UBA Pro Side)
Acceptor Hard Reset Signal Line
Output Signal Line from Acceptor to Host
Reserved (For the UBA Pro Side)
2 - 6
Function
Function
© 2020, JAPAN CASH MACHINE CO., LTD.
Installation