Rt/Rq Transporting To Cash Box Flow Process - JCM GLOBAL UBA Pro RT Series Operation And Maintenance Manual

Section 2

RT/RQ Transporting to Cash Box Flow Process

Figure 2-37 RT/RQ Transporting to Cash Box
Flow Process
C2
a
NO
b
YES
d
e
YES
NO
g
h
i
YES
NO
A
*1). When an abnormal signal is received, remove and re-supply Power to the RT/RQ Unit after resolving the problem, or send a
RESET Command from the Host Machine.
*2). When a "Cash Box Full" Signal is received, remove the Banknotes from the Cash Box and re-seat the Cash Box back into
the Unit. The RT/RQ will automatically start initializing.
P/N 960-000213R_Rev.A
UBA Pro RT/RQ™ Series Banknote Recycler
NO
c
YES
f
j
Figure 2-37 RT/RQ Transporting to Cash Box Flow Process
C2) From "Accepting Banknotes" flowchart (Figure 2-35)
a) Transporting the Banknote to the Cash Box
b) Was the Banknote transported to the Cash Box?
c) Retried the transportation operation three (3) times?
d) Rotate the Anti-Pullback (PB) Unit
e) Was an Abnormal Error detected by the PB Unit?
f) Stop operation (Abnormal Signal Output (*1)
g) Sending an Acceptance VEND Signal
h) Collecting the Banknote
i) Is the Cash Box full?
j) Stop operation. Sending a FULL Signal (*2)
A) Return to "A" Main flowchart (Figure 2-34)
© 2020, JAPAN CASH MACHINE CO., LTD.
2 - 2 4
Installation