Clear Film And Det Film Removal - JCM GLOBAL UBA Pro RT Series Operation And Maintenance Manual

Disassembly/Reassembly

Clear Film and DET Film Removal

To remove the Clear Film and the DET Film, pro-
ceed as follows:
1. Push the Film Bobbin Assy. (Figure 4-128 a) in
the direction indicated by the Arrow to remove
the single (1) Parallel Pin (Figure 4-128 b).
Figure 4-128 Clear
a
b
Figure 4-128 Clear Film and DET Film Removal 1
2. Disassemble the Film Bobbin Assy. as illustrated.
Figure 4-129 Clear
Figure 4-129 Clear Film and DET Film Removal 2
3. Release the Spring End from the Slot in the Film
Bobbin (Figure 4-130 a).
4. Remove the single (1) Spring (Figure 4-130 b).
Figure 4-130 Clear
a
Figure 4-130 Clear Film and DET Film Removal 3
5. Remove the single (1) Clamp (Figure 4-131 a).
6. Remove the Clear Film or DET Film.
Figure 4-131 Clear
a
Clear Film
Figure 4-131 Clear Film and DET Film Removal 4
P/N 960-000213R_Rev.A
UBA Pro RT/RQ™ Series Banknote Recycler
b
a
DET Film
4 - 2 5
© 2020, JAPAN CASH MACHINE CO., LTD.
Section 4