Drum 2 Motor Speed Test (Rt Transport); Rq Transport Performance Tests; Feed Motor Speed Forward Rotation Test (Rq Transport) - JCM GLOBAL UBA Pro RT Series Operation And Maintenance Manual

Section 6

Drum 2 Motor Speed Test (RT Transport)

To perform the Drum 2 Motor Speed Test on the
RT Transport side, proceed as follows:
1. Ensure that the Recycler and Cash Box is prop-
erly installed.
2. Launch the Performance Test Program (see
page 6-7).
3. Select "
TWIN_DRUM_MOTOR_TEST2
6-51 a).
4. Click the " "
Start
51 b) to begin the Test.
Figure 6-51 Drum 2 Motor Speed Test (RT
Transport) 1
b
a
Figure 6-51 Drum 2 Motor Speed Test
(RT Transport) 1
5. The measured speed will appear in the "
Motor 2 (RC-Twin)
Screen.
6. Confirm that the motor speed is in the acceptable
range:
700mm/sec to 950mm/sec (Forward/Reverse)
7. Click the " "
Stop
52 b) to end the test.
Figure 6-52 Drum 2 Motor Speed Test (RT
b
a
Figure 6-52 Drum 2 Motor Speed Test
(RT Transport) 2
P/N 960-000213R_Rev.A
UBA Pro RT/RQ™ Series Banknote Recycler
" (Figure
Screen Button (Figure 6-
RC-Drum
" area (Figure 6-52 a) on the
Screen Button (Figure 6-
Scroll

RQ Transport Performance Tests

This section provides instructions for conducting a
Performance Test Using a PC on the RQ Transport
side ( b).
Figure 6-27
Feed Motor Speed Forward Rotation Test (RQ
Transport)
To perform the Feed Motor Speed Test in the for-
ward rotation on the RQ Transport side, proceed as
follows:
1. Ensure that the Recycler and Cash Box is prop-
erly installed.
2. Launch the Performance Test Program (see
page 6-7).
3. Select "
QUAD_FEED_MOTOR_FWD_TEST
(Figure 6-53 a).
4. Click the "
Start
53 b) to begin the Test.
Figure 6-53 Feed Motor Speed Forward
Rotation Test (RQ Transport) 1
Scroll
a
Figure 6-53 Feed Motor Speed Forward Rotation
Test (RQ Transport) 1
5. The measured speed will appear in the "
Motor (RC-Quad)
Screen.
6. Confirm that the motor speed is in the acceptable
range: 600mm/sec to 900mm/sec
7. Click the "
Stop
54 b) to end the test.
Figure 6-54 Feed Motor Speed Forward
a
Figure 6-54 Feed Motor Speed Forward Rotation
Test (RQ Transport) 2
© 2020, JAPAN CASH MACHINE CO., LTD.
6 - 1 2
Calibration and Testing
" Screen Button (Figure 6-
b
RC-Feed
" area (Figure 6-54 a) on the
" Screen Button (Figure 6-
b
"