Led Test; Centering Movement Test; Figure 6-61 Led Test Selection; Figure 6-62 Led Test Start Button - JCM GLOBAL DBV Series Operation And Maintenance Manual

Calibration and Testing

LED Test

To perform the LED Test, proceed as follows:
1. Launch the Performance Test Main Screen (Refer
to "Performance Test Main Screen" on page 6-
10).
2. Click the "Performance Test" Pull-down Menu
and select the "
LED_TEST

Figure 6-61 LED Test Selection

a
Figure 6-61 LED Test Selection
3. Click the " "
Start
62 a) to begin the test.

Figure 6-62 LED Test Start Button

a
Figure 6-62 LED Test Start Button
4. Confirm that the LED flashes in the following
color sequence, Red
=> Yellow => Magenta
White .
5. Click the " "
Stop
63 a) to end the test.

Figure 6-63 LED Test Stop Button

a
Figure 6-63 LED Test Stop Button
P/N 960-100933R_Rev. 2 {EDP #233449}
DBV™ Series DBV-500 Banknote Acceptor
" (Figure 6-61 a).
Screen Button (Figure 6-
=> Green => Blue
=> Cyan =>
Screen Button (Figure 6-
6 - 1 3

Centering Movement Test

To perform the Centering Mechanism Movement
Test, proceed as follows:
1. Launch the Performance Test Main Screen (Refer
to "Performance Test Main Screen" on page 6-
10).
2. Click the "Performance Test" Pull-down Menu
and select the "
CENTERING_TEST
64 a).

Figure 6-64 Centering Test Selection

a
Figure 6-64 Centering Test Selection
3. Click the " "
Start
65 a) to begin the test.

Figure 6-65 Centering Test Start Button

a
Figure 6-65 Centering Test Start Button
4. Confirm that the Centering Mechanism Move-
ment performs normally.
5. Click the " "
Stop
66 a) to end the test.

Figure 6-66 Centering Test Stop Button

a
Figure 6-66 Centering Test Stop Button
© 2020 JAPAN CASH MACHINE CO., LTD.
Section 6
" (Figure 6-
Screen Button (Figure 6-
Screen Button (Figure 6-