Festo CPV-D102 Elektronics Manual page 48

1. Installation CPV−DI02 and CPV−CS02
1−34
Caution
The max. cable length between the CPV Direct and the last
CPI/CP module must not exceed 10 m.
The CP connecting cables must have special electrical
properties. Therefore always use Festo CP connecting
cables. An overview can be found in appendix A.
Ready−to−use CP connecting cables are available from Festo.
These are available in various lengths and designs.
Seal unused CP connections of your
CP system with the relevant seal pro
vided. In this way you will comply with
protection class IP65.
Festo P.BE−CPV−DI02−EN en 0704NH