Festo CPV-D102 Elektronics Manual page 114

4. Commissioning CPV−CS02 (ABB CS31)
CPI system
Extension
CPV Direct
(without extension)
CPV Direct +
CP extension modules:
CP valve terminal or
CPI output module
CPV Direct +
CP extension modules:
CP valve terminal or
CPI output module
CPV Direct +
CP extension modules:
CP valve terminal or
CPI output module
CPV Direct +
CP extension modules:
CP valve terminal or
CPI output module
CP input module
CP input module
n = set bus address
Tab. 4/2: Configuration possibilities and addresses for a CS31 CPU
4−8
Inputs/outputs
16O
24O
O n+1,00
32O
O n+1,00
40O
O n+1,00
O n+2,00
48O
O n+1,00
O n+2,00
8I, 16I
24I, 32I
The CS31 CPU ascertains the configuration of the CS31 system
when it is switched on and does not require any settings.
Note
With system flag 00,09 the processing of the programcan
be blocked until the specified number of I/O modules
(including the CP system) exists on the CS31 system bus.
Signal designation when a CS31
CPU is used
Outputs
O n,00 O n,15
O n,00 O n,15
O n+1,15
O n,00 O n,15
O n+1,15
O n,00 O n,15
O n+1,15
O n+2,15
O n,00 O n,15
O n+1,15
O n+2,15
Festo P.BE−CPV−DI02−EN en 0704NH
Inputs
I n,00 I n,15
I n,00 I n,15
I n+1,00 I n+1,15