Contents and general instructions
Notes on the use of this manual
VIII
Note
This manual takes into consideration the functioning of the
following software and hardware versions:
CPV−DI02: software as from 14.09.06, hardware as from
0107 (for sizes CPV10 and CPV14)
CPV−CS02: software as from 31.07.06, hardware as from
0107 (for sizes CPV10 and CPV14)
This manual contains specific information on installing, com
missioning, programming and diagnosing CPV valve terminals
with direct connection for the field buses named.
Information on the pneumatics can be found in the
Pneumatics manual P.BE−CDV−..."
Further information on the PROFIBUS−DP can be found in:
the setting up guidelines for the PROFIBUS−DP
the manuals of the master manufacturer.
Festo P.BE−CPV−DI02−EN en 0704NH