Festo CPV-D102 Elektronics Manual page 126

5. Diagnosis CPV−CS02 (ABB CS31)
FK3 = simple fault
1
2
3
Fault recognition/meaning with Festo CPI/CP systems
1
15 = CPV Direct not connected
D
2
Device type:
2 = Binary outputs (CPV Direct without extension or extended by one CP valve terminal/
D
CP output module)
4 = Binary inputs/outputs (CPV Direct extended by one input module)
D
3
Group no. (= set station number, decimal)
4
1 = Internal module fault (in the CP system)
D
Undervoltage at valves 20.4 V / load voltage failure (CP output module,
CP valve terminal) / short circuit in sensor supply)
2 = Wire fracture, connection interrupted to CP output module / CP input module /
D
CP valve terminal (open load)
4 = Overload / short circuit of an electric output / configuration fault in CP string /
D
short circuit in CP string / valve fault MPA−CPI (e.g. short circuit)
5
Channel no.: Is always 0 in conjunction with CPV valve terminals
Tab. 5/7: Example 07KR91 meaning of the ABB fault flag with Festo CP systems
5−10
Example 1: CPU 07KR91
The entries of the CPV Direct in the fault flag words (FW) have
the following meaning:
F 255,13
FW 255,00
FW 255,01
FW 255,02
FW 255,03
FW 255,04
FW 255,05
FW 255,06
FW 255,07
FK4 = warning
F 255,10
F 255,14
FW 255,08
FW 255,09
FW 255,10
FW 255,11
FW 255,12
FW 255,13
FW 255,14
FW 255,15
Festo P.BE−CPV−DI02−E N en 0704NH
4
2
3
5