Pin Assignment Of Power Supply - Festo CPX-SF34 Manual

1. Installation
1.7

Pin assignment of power supply

Festo P.BE−CPX−SF34+SF35−E N en 1007NH
Warning
Use only PELV power circuits according to IEC/DIN
·
EN 60204−1 (Protective Extra−Low Voltage, PELV) for the
power supply.
Also take into account the general requirements for
PELV power circuits according to IEC/DIN EN 60204−1.
Use only power sources that guarantee reliable
·
electrical isolation of the operating voltage as per
IEC/DIN EN 60204−1.
Through the use of PELV circuits, protection against electric
shock (protection against direct and indirect contact) is
ensured in accordance with IEC/DIN EN 60204−1 (electrical
equipment of machines, general requirements).
The current consumption of a CPX terminal depends on the
number and type of integrated modules and components.
Read the information on power supply as well as on the
earthing measures to be carried out in the CPX system
manual.
1−17