Festo CPV-D102 Elektronics Manual page 138

A. Technical appendix
Octet Designation
2 and 3 WD_Fact_1
WD_Fact_2
4 Minimum Station Delay
Responder (min T
5 and 6 Ident_number
7 Group_Ident
8 32 User_Prm_Data
Tab. A/2: Octets 2
A−8
Further octets
Explanation
Range 1
CPI system is transferred with these two octets:
TWD [s] = 10 ms x WD_Fact_1 x WD_Fact_2
The minimum time the CPI system must wait, before
) the reply telegram may be sent to the DP master.
SDR
Transmission of the manufacturer identifier of the CPV
Direct (= 0A35C
system are only accepted if the transmitted and the
programmed manufacturer identifiers are the same.
Not supported by the CPI system
Not supported by the CPI system
32
255: The response monitoring time of the
); parametrizing telegrams to the CPI
h
Festo P.BE−CPV−DI02−EN en 0704NH