Connection Possibilities - Festo CPV-D102 Elektronics Manual

1. Installation CPV−DI02 and CPV−CS02

1.3.4 Connection possibilities

1
Hinged cover with
display window
2
Blanking plug if
connection is not
used
3
Clamp strap for
screening/shield
connection
4
Field bus
incoming (IN)
5
Switch for bus
termination and
continuing field
bus
6
Field bus
continuing (OUT)
7
Only connected
capacitively
Fig. 1/6: Field bus plug from Festo, type FBS−SUB−9−GS−DP−B
1−20
Note
Use a protective cap or blanking plug to seal unused con
nections. You will then comply with protection class IP65.
Connection with field bus plugs from Festo
Observe the fitting instructions for the field bus plug.
·
You can connect the CPV Direct to the field bus easily with the
field bus plug from Festo (type FBS−SUB−9−GS−DP−B, part no.
532216). You can disconnect the plug from the CPV Direct
without interrupting the bus cable (T−TAP function).
1 2 3
Bus in
Bus out
A B A B
ON
7 6 5
Festo P.BE−CPV−DI02−EN en 0704NH
4