Festo CPV-D102 Elektronics Manual page 35

1. Installation CPV−DI02 and CPV−CS02
DIL switches
Festo P.BE−CPV−DI02−EN en 0704NH
Note
The clamp strap in the field bus plug from Festo is
connected internally only capacitively with the metallic
housing of the Sub−D plug. This is to prevent equalizing
currents flowing through the screening of the field bus
cable.
With the switch in the field bus plug you can switch the
following:
switch setting OFF: the bus termination is switched off
switch setting ON:
Note
Note the type designation of your field bus plug. The plug
type FBS−SUB−9−GS−DP−B switches the continuing field bus
cable off when the bus termination is switched on.
and the continuing field bus cable
is switched on.
the bus termination is switched on
and the continuing field bus cable
is switched off (see Fig. 1/7).
1−21