Measures Following Replacement Of Boards - Sirona ORTHOPHOS XG 3Dready Service Manual

Tab 6
59 38 399 D3352
D3352.076.01.26.02 09.2016
6.22.4

Measures following replacement of boards

CAUTION
After replacing boards or modules containing boards, check to make sure that
the software version of the module corresponds to the current software status
of the system. The software version for the modules can...
Plus ready
For XG / 3D :
be accessed through service routine S008.2 or the
check the info screen in advance to determine whether the current software
constellation is permissible. If this is not the case, the version number of the
entire software is labeled with an asterisk (e.g. V02.20*)
for XG 5 / 3 / 3 PPE:
be accessed through service routine S008.2 or the
Perform a software update or downgrade (see Section 1.7) in case of software
incompatibilities.
Always perform the measures described below in the given sequence and do
not carry out any other actions between the steps.
6.22 Replacing circuit boards
. You can also
DETAILS
.
DETAILS
6 – 77