Replacing/Adjusting The Fh Light Localizer (Pan) - Sirona ORTHOPHOS XG 3Dready Service Manual

Tab 6
1.
DX1
Removing the covers
Removing the defective laser module
59 38 399 D3352
D3352.076.01.26.02 09.2016

6.8 Replacing/adjusting the FH light localizer (PAN)

6.8
Replacing/adjusting the FH light localizer
(PAN)
3.
2.
B
Remove the covers (see also section 1.13):
– Top arm
1. Pull the cable of the FH laser module off connector X807 on board DX1.
Detach the cover (see also section 1.13):
– Front slide cover, carefully pulling it together with the FH light localizer
off toward the front.
2. Detach the cable from the strain reliefs.
3. Loosen the two screws A and remove the holder including the laser mod-
ule (FH).
4. Loosen the two screws B and carefully pull laser module C out of the hold-
er toward the front.
A
A
4.
C
B
6 – 31