Replacing The Ring Motor (M1_3) - Sirona ORTHOPHOS XG 3Dready Service Manual

Tab 6
F
A
B
3.
Removing the covers
Removing the defective motor
59 38 399 D3352
D3352.076.01.26.02 09.2016
6.3

Replacing the ring motor (M1_3)

D
1.
2.
E
C
Remove the covers (see section 1.13):
– Top arm
1. Detach the motor cable from the cable harness and pull it off connector
X813 on board DX1.
2. Loosen the four screws A on the ring motor and remove the motor includ-
ing the screws and the serrated washers B.

6.3 Replacing the ring motor (M1_3)

6 – 19