Emerson Rosemount 5900S Reference Manual page 63

Reference Manual
00809-0100-5900
3.3.3 Array antenna - fix version
Prerequisites
See Still Pipe antenna requirements
installing the gauge on the tank.
Measure the pipe inner diameter before closing the still-pipe. Enter this value during the
configuration.
Follow this instruction when installing the Rosemount 5900S with Array Antenna Fixed
version.
Procedure
1. Insert the Antenna Waveguide into the flange hole, and place the antenna label into
2. Tighten the nut.
3. Secure the nut by folding the tab on the label plate over the nut.
4. Bend the antenna label plate at the slot mark to a position with the text clearly
Rosemount 5900S Radar Level Gauge
position, with text down.
A. Nut
B. Antenna label plate
C. Antenna Waveguide
A. Nut
visible.
for information on mounting considerations before
Installation
September 2019
63