Emerson Rosemount 5900S Reference Manual page 49

Reference Manual
00809-0100-5900
7. Tighten the nut that connects the transmitter head to the adapter.
8. Align the level gauge by using the cross hairs on top of the transmitter head.
9. In case the weather protection hood is attached, the gauge can be aligned by using
10. Ensure that the gauge is directed at an angle of 45° to the line of sight from the
11. Tighten the adapter screws (4 × M10).
12. In case the Weather Protection Hood was removed, put it back on top of the head
13. Wire the gauge and configure by using the Rosemount TankMaster WinSetup
Rosemount 5900S Radar Level Gauge
A. Tank
B. Tank center
C. Line of sight
a line of sight along the screws on top of the head.
center of the tank to the nozzle.
and tighten the screw.
A. Weather Protection Hood
software (see the Rosemount Tank Gauging
September 2019
System Configuration Manual).
Installation
49