Emerson Rosemount 5900S Reference Manual page 193

Reference Manual
00809-0100-5900
you an instant view of how the gauge operates. You may also configure the window by
adding registers of special interest.
Procedure
1. In the TankMaster WinSetup workspace window, right-click the device icon.
2. Right-click and select View Diagnostic Registers.
Diagnostics registers window
The register values in the diagnostics window are of read only type. They are loaded from
the device as the window is opened.
A grey background color of the table cell in the Value column means that the register is of
either Bitfield or ENUM type. An expanded Bitfield/ENUM window can be opened for this
type of register. Double-click the cell to open the Expanded Bitfield/ENUM window.
If needed, the values can be presented as hexadecimal numbers. This applies to all
registers of Bitfield and ENUM types. Select the Show in Hex check box to present Bitfield
and ENUM registers as hexadecimal numbers.
The Configure button lets you open the Configure Diagnostic Registers window where you
can change the list of registers to be displayed in the View Diagnostic Registers window. See
the Rosemount Tank Gauging
The Configure Diagnostic Registers window also has a Log Setup button for access to the
Register Log Scheduling window which allows you to setup a log schedule for automatic
start and stop of register logging. See
more information.
Rosemount 5900S Radar Level Gauge
System Configuration Manual
Logging measurement data using TankMaster
Service and troubleshooting
September 2019
for more information.
™
for
193