Emerson Rosemount 5900S Reference Manual page 290

™
F Fieldbus Block Information
OUNDATION
September 2019
Table C-18: Advanced Configuration Transducer Block Parameters
Index
Number
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
290
Parameter
BLOCK_ERR
UPDATE_EVT
BLOCK_ALM
TRANSDUCER_DIRECTORY
TRANSDUCER_TYPE
TRANSDUCER_TYPE_VER
XD_ERROR
COLLECTION_DIRECTORY
AUTO_CONF_MEAS_FUNC
USED_EXTRA_ECHO_MIN_ULLAG
E
USED_EXTRA_ECHO_MAX_ULLAG
E
USED_EXTRA_ECHO_MIN_AMPL
EXTRA_ECHO_MIN_ULLAGE
EXTRA_ECHO_MAX_ULLAGE
EXTRA_ECHO_MIN_AMPL
USED_EMPTY_TANK_DETECTION_
AREA
EMPTY_TANK_DETECTION_AREA
USED_ECHO_TIMEOUT
USED_CLOSE_DIST
USED_SLOW_SEARCH_SPEED
USED_FFT_MATCH_THRESH
Description
This parameter reflects the error status associated
with the hardware or software components
associated with a block. It is a bit string, so that
multiple errors may be shown.
This alert is generated by any change to the static
data
The block alarm is used for all configuration,
hardware, connection failure or system problems
in the block. The cause of the alert is entered in
the subcode field. The first alert to become active
will set the Active status in the Status parameter.
As soon as the Unreported status is cleared by the
alert reporting task, another block alert may be
reported without clearing the Active status, if the
subcode has changed.
Directory that specifies the number and starting
indices of the transducers in the transducer block.
Identifies the transducer.
A transducer block alarm sub code.
A directory that specifies the number, starting
indices, and DD Item ID's of the data collections in
each transducer within a transducer block.
Check box to enable manual settings of affected
parameters
Parameters and functions for Empty Tank
Handling.
See Empty tank handling for more information.
Parameters and functions for Echo Tracking.
See Surface Echo Tracking for more information.
Reference Manual
00809-0100-5900
(continued)
Reference Manual