Emerson Rosemount 5900S Reference Manual page 42

Installation
September 2019
Figure 3-11: Installation of Verification Pin and Inclination Requirements for Flange
and Still-pipe
A. 1000 < L < 2500 mm (39 < L < 98 in.).
Recommended: 1200 mm (47 in.)
B. Min. 200 mm (8 in.) from Verification pin to
product
C. Hole for Verification Pin; Ø 20 mm.
D. Holes for density equalization; Ø 20 mm
(3/4 in.)
E. 500 mm (20 in.)
F. Mark on still-pipe flange
42
G. The Verification Pin is directed towards the
bolt hole at the pipe flange marking.
H. Bolt hole
I. Align Verification Pin and bolt hole within
1°.
J. Maximum 1°
K. Maximum 0.5°
Reference Manual
00809-0100-5900
Reference Manual