Overview
September 2019
Figure 2-10: LPG/LNG Antenna
2.6
Installation procedure
Follow these steps for proper installation:
Procedure
1. Review installation considerations. See
2. Mount the gauge. See
3. Wire the gauge. See
4. Make sure covers and cable/conduit connections are tight.
5. Power up the gauge.
6. Configure the gauge. See Configuration.
7. Verify measurements.
8. (Optional) Enable the Write Protection switch.
9. (Optional) SIL configuration.
26
Installation
Mechanical
installation.
Electrical
installation.
Reference Manual
00809-0100-5900
considerations.
Reference Manual