Register Transducer Block - Emerson Rosemount 5900S Reference Manual

Reference Manual
00809-0100-5900
Table C-16: Volume Transducer Block Parameters
Index
Number
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
C.6

Register Transducer block

The Register Transducer block allows access to Database registers and Input registers. This
makes it possible to read a selected set of register directly by accessing the memory
location.
The Register Transducer block is only available with advanced service.
CAUTION
Since the Register Transducer block allows access to most registers, it should be handled
with care and ONLY to be changed by trained and certified service personnel, or as guided
by Emerson Automation Solutions support personnel.
Rosemount 5900S Radar Level Gauge
Parameter
TRANSDUCER_TYPE
TRANSDUCER_TYPE_VER
XD_ERROR
COLLECTION_DIRECTORY
LENGTH_UNIT
VOLUME_UNIT
VOLUME
VOLUME_STATUS
LEVEL
VOLUME_ CALC_METHOD
VOLUME_IDEAL_DIAMETER
VOLUME_IDEAL_LENGTH
VOLUME_OFFSET
VOLUME_INTERPOLATE_MET
HOD
VOLUME_
STRAP_TABLE_LENGTH
STRAP_LEVEL_1_30
STRAP_VOLUME_1_30
™
F Fieldbus Block Information
OUNDATION
(continued)
Description
Identifies the transducer.
A transducer block alarm sub code.
A directory that specifies the number, starting
indices, and DD Item ID's of the data collections in
each transducer within a transducer block.
Same as in measurement transducer block
Same as in measurement transducer block
Calculated volume and status
Detailed status
Used level value
Used volume calculation method
Diameter for pre-defined standard tank type
Length for pre-defined standard tank type
Lets you use a non-zero volume for the zero level. Can
be used in case you want to include the product
volume below the zero level.
Interpolation method for levels between strapping
table points
Number of strapping table points
Level values for strapping points 1 to 30
Volume values for strapping points 1 to 30
September 2019
287