Emerson Rosemount 5900S Reference Manual page 156

Configuration
September 2019
5. Click the Change button and set the device to Out Of Service (OOS) mode. In case
6. Do one of the following to start the configuration wizard:
7. In case the device was not set to Out Of Service mode, a warning message will
156
you don't change device mode now, it will automatically be changed when starting
the Measurement Setup wizard.
• in the Overview window, click the Measurement Setup button
select the Configure option and in the Guided Setup window click the
•
Measurement Setup button
appear that the device needs to be in Out Of Service mode in order to make
configuration changes. By clicking the Next button, the Rosemount 5900S level
gauge will automatically be set to Out Of Service (OOS) mode, and the
Measurement Setup - Units window appears.
Reference Manual
00809-0100-5900
Reference Manual