Emerson Rosemount 5900S Reference Manual page 62

Installation
September 2019
17. In case the Weather Protection Hood was removed, put it back on top of the
18. Tighten the upper nut to lock the finger nut (you may temporarily remove the
19. Wire the gauge and configure by using the RosemountTankMaster WinSetup
62
transmitter head and tighten the screw.
A. Weather Protection Hood
B. Finger Nut
transmitter head to make room for tools if needed), and secure by folding the tab
washer over the nut.
A. Upper Nut
software (see the Rosemount Tank Gauging
Reference Manual
00809-0100-5900
System Configuration Manual).
Reference Manual