Emerson Rosemount 5900S Reference Manual page 163

Reference Manual
00809-0100-5900
4.15.3 Volume configuration
To open the Volume configuration option:
Procedure
1. Open the AMS Device Manager application.
2. Open Configure → Manual Setup → Volume.
Rosemount 5900S Radar Level Gauge
The Volume tab lets you configure the Rosemount 5900S for volume
measurements. You can choose a calculation method based on one of the pre-
defined standard tank types or the Strapping Table option. The Strapping Table can
be used in case a standard tank type does not provide sufficient accuracy.
Depending on the chosen Volume Calculation Method, i.e. Ideal Sphere, Vertical or
Horizontal Cylinder, you will need to specify one or both of the two parameters
Tank Diameter (L1) and Tank Length (L2).
A Volume Offset parameter can be specified if you like to use a non-zero volume for
the zero level. This may be useful if you would like to include the product volume
below the zero level in the total volume.
Figure 4-20: Volume Configuration
Configuration
September 2019
163