Connecting A Power Sensor; E-Series, 8480, N8480 Series, And U2000 Series Power Sensor Models - Keysight EPM Series Installation Manual

1 Getting Started

Connecting a Power Sensor

E-Series, 8480, N8480 Series, and U2000 Series power sensor models

Using the Keysight 11730A power sensor cable, any Keysight 8480, or N8480
Series, E-Series power sensor can be connected to the N1913A or N1914A power
meters. The U2000 Series power sensors can be connected to the meter using the
Keysight U2031A power sensor cable.
The following shows the procedure for single channel meters configured with front
panel mounted POWER REF and CHANNEL connectors. The procedure is similar
for meters configured with rear panel connectors. Also, for dual channel meters
(N1914A), you should repeat the procedure for the channel B sensor.
1 Connect the sensor to a 11730A cable.
2 Connect the other end of the 11730A cable to the CHANNEL A (or
34
CHANNEL B) input connector.
Keysight N1913/1914A Installation Guide