Type Code - Baumuller b maXX 5000 Series Instruction Handbook Manual

4.2
Identification of the device
4.2.3

Type code

The type code has the format: BM5XXX - XXXX - XXXX - XXXX - XX - XXXX.
The type code is explained in the following table.
BM5XXX-XXXX-XXXX-XXXX-XX-XXXX
BM5XXX-XXXX-XXXX-XXXX-XX-XXXX
BM5XXX-XXXX-XXXX-XXXX-XX-XXXX
BM5XXX-XXXX-XXXX-XXXX-XX-XXXX
BM5XXX-XXXX-XXXX-XXXX-XX-XXXX
BM5XXX-XXXX-XXXX-XXXX-XX-XXXX
84
Instruction handbook b maXX 5000
Document No.: 5.09021.16
of 328
Device generation
Device design
0: Mains rectifier
1: Active mains rectifier
3: Axis unit safety
5: Basic unit/power module safety
6: Basic unit/power module safety, optimized for peak current
7: Basic unit/power module safety, optimized for rated current, water-cooled
8: Multi-axis controller safety
Housing size
1 to 9,
refer to ZDimensions– as from page 29.
Current grading (output rated current)
2 to 8 (current value dependent on the housing size), 
refer to ZElectrical data– as from page 58.
Type of cooling
S: Air-cooled with air supply and with air outlet in the control cabinet
A: Air-cooled with air supply and with air outlet outside the control cabinet 
Z: Water-cooled with water cooler in the control cabinet
F: Water-cooled with water cooler outside the control cabinet 
C: Cold plate cooling via mounting wall of the control cabinet
Type of power supply system
T: BM50XX, BM51XX: grounded TN or TT systems
I: BM50XX: IT systems, grounded TN or TT systems
G: BM50XX: Grounded delta systems, IT systems, grounded TN or TT systems
R: BM50XX with charge resistor: Grounded TN or TT systems
S: BM50XX with charge resistor: IT systems, grounded TN or TT systems
W: BM50XX with charge resistor: Grounded delta, IT systems, 
grounded TN or TT systems
Baumüller Nürnberg GmbH