Shielding Plan Side-By-Side Mounted System; Shielding Connection Mounting Plate - Baumuller b maXX 5000 Series Instruction Handbook Manual

7.9

Shielding plan side-by-side mounted system

The shielding of the motor cable as well as of the motor temperature cable must be con-
nected electrically with the mounting plate or with shield sheet (see
tion with shield sheet–
NOTE!
Baumüller Nürnberg GmbH recommends the shielding connection with shield sheet.
NOTE!
Pay attention to strain relief for all cables!
7.9.1

Shielding connection mounting plate

Establish a large-area contact between the shield and the conductive and grounded
mounting plate by means of a conductive clamp.
Refer to
on page 134).
ZConnecting the shield– as from page 135.
Instruction handbook b maXX 5000
Document No.: 5.09021.16
7
Installation
ZShielding connec-
133
of 328