6.2
Preparing for mounting
For all
versions:
*: Relative tolerance of discretionary divisions: ±0.1 mm
Figure 43:
6.2.2
Mechanical data of the mounting plate for cold plate
The cooling version cold plate is a particular efficient cooling alternative. The heat dissi-
pation is done via 2 contact surfaces. The first one is the mounting platform within the con-
trol cabinet or on the machine base, the other is the cold plate on the device's back. High
requirements e.g. to surface roughness and evenness for this surface are specified, to
ensure an optimal heat flow. Already a slight damage/pollution of the surface can cause
a significant deterioration in heat dissipation to the mounting plate.
For this reason while handle the units protect the sensitive function surface to avoid dam-
age.
Surface flatness
(across the entire surface)
Surface roughness Ra
Material of the plate (recommendation)
112
Instruction handbook b maXX 5000
Document No.: 5.09021.16
of 328
Drilling pattern without mounting rail for all versions
0.05 mm
1.2 µm
AlMgSi 0.5
Baumüller Nürnberg GmbH