Mounting Of Toroidal Cores; Drilling Pattern Toroidal Cores - Baumuller b maXX 5000 Series Instruction Handbook Manual

6.4

Mounting of toroidal cores

The use of toroidal cores, see
operation of the active mains rectifier BM51XX within a C2 surrounding.
6.4.1

Drilling pattern toroidal cores

Use the drilling pattern for drilling the necessary holes.
*: With toroidal cores
Figure 50:
NOTE!
The toroidal core should be mounted approx. 100 mm under the device.
ZToroidal cores–
Dimensions/drilling pattern toroidal cores
on page 287 is necessary to ensure the
Instruction handbook b maXX 5000
Document No.: 5.09021.16
6
Mounting
119
of 328