8.3
Monitoring
8.3
Monitoring
8.3.1
Monitoring BM50XX
The controller unit monitors the device during operation. If the controller unit detects a
state that deviates from the normal operation condition, the device generates an error
message.
Error message
If the controller unit detects that the device is not working error-free, then this is shown
via the LEDs H1 to H4 (see
vices without safety function and see
from page 306 for devices with safety function).
For further information see
8.3.2
Monitoring BM51XX, BM53XX
The controller unit monitors the device during operation. If the controller unit detects a
state that deviates from the normal operation condition, the device either generates a
warning or an error message.
Warning
If the controller unit detects an operating condition that exceeds a warning threshold, a
corresponding warning is shown on the display or, respectively, controller. The most im-
portant warning message (Current limit reached) is also shown by the device through the
LED H13 or H23 (see
Error message
If the controller unit detects that the device is not working error-free, then this is shown
via the LED H14 or H24 (see
responding error code will continue to be shown on the display and/or a controller can
read out the error code on the device.
For further information see
212
Instruction handbook b maXX 5000
Document No.: 5.09021.16
of 328
ZDisplay and operating elements–
ZC.4 LED display BM5030 with safety function–
ZTroubleshooting and Fault correction–
ZDisplay and operating elements–
ZDisplay and operating elements–
ZTroubleshooting and Fault correction–
as from page 90 for de-
as from page 227.
as from page 90).
as from page 90). A cor-
as from page 227.
Baumüller Nürnberg GmbH
as