Required Environmental Conditions - Baumuller b maXX 5000 Series Instruction Handbook Manual

3.3.4

Required environmental conditions

Transport temperature range
Transport climate class (K)
EN 60721-3-2
Storage temperature range
Storage climate class
EN 60721-3-1
Operating environment
Operating temperature range
Operating climate class
EN 60721-3-3
Installation altitude
Humidity (operating)
EN 60721-3-3
Ionizing and non-ionized radiation
Vibration, shock and continuous shock
EN 61800-5-1, chapter 5.2.6.4 vibration test
Degree of contamination
EN 61800-5-1, table 6, tab. 2
1)
If used in areas according to the category C2 of IEC 61800-3:2012, additional measures might be necessary. In this case the plant
manufacturer / user has to provide evidence these additional measures take effect and the in IEC 61800-3 required thresholds of the
category C2 are met.
2)
Refer to correction values at changed operation conditions at
NOTICE!
Normally only a non-conductive dirt buildup occurs. Any conductive dirt buildup,
whether short-term or permanent, is prohibited and could lead to destruction of the
device. The customer is responsible for destruction resulting from dirt buildup of con-
ductive materials or matter.
BM50XX
BM517X Industrial supply network C3
refer to ZMounting of toroidal cores–
BM519X
(with derating above 1000 m)
Relative humidity: 5 % to 85 % non-condensed,
absolute humidity: 1 g/m
ZCorrection values at changed operating conditions–
Instruction handbook b maXX 5000
Technical data
- 25 °C to + 70 °C
2 K 3
- 25 °C to + 55 °C
1 K 4
Industrial supply network C2
Industrial supply network C3
Min. 5 °C to max. 55 °C
(with derating above 40 °C)
3 K 3
Up to 4000 m above MSL
and
3
to 25 g/m
< measurable range
Max. 0.5 g when operating
2
Document No.: 5.09021.16
3
1)
,
as from page 119
2)
2)
3
on page 48.
47
of 328