3.1
Dimensions
The following drawings show the main dimensions of the devices in millimeters [mm]. The
space requirements in the control cabinet are also determined based on these drawings.
To make the necessary drill holes/cutout sections, use the drawings in
as from page 111.
3.1.1
BM503X dimensions
Figure 3:
BM503X-C/-S dimensions
T
ECHNICAL DATA
3
*: Observe minimum clearance.
Please follow the notes for mounting and
ZCooling–
on page 56.
Instruction handbook b maXX 5000
Document No.: 5.09021.16
ZDrilling pattern–
29
of 328