Function; C.2 Function - Baumuller b maXX 5000 Series Instruction Handbook Manual

C.2

Function

C.2 Function
The mains rectifier BM5030 with safety function converts the AC voltage of the power
supply (U
U
DC link
(U
tion, i. e. a switch disconnects DC link + and another DC link - (see figure below).
The STO function is available via connector X2.
Figure 126:
This STO function is available:
Type of automatic locking function (BM5030-XX2X)
In case of a fault of one switch, the device is locked automatically and remains in STO
state.
302
Instruction handbook b maXX 5000
Document No.: 5.09021.16
of 328
) to the DC link voltage for the decentralized drive solutions BM2500 (U
AC
). The STO function is integrated in this device, disconnecting the DC link voltage
) of the mains rectifier to the axes units (U
DC
Electronics
BM5030 with safety function
). This is a two channel disconnec-
DC link
Electronics
Baumüller Nürnberg GmbH
/
DC
DC link +
DC link
DC link -