Operating Conditions; Requirements For Power Supply / Mains Supply System - Baumuller b maXX 5000 Series Instruction Handbook Manual

3.3

Operating conditions

3.3 Operating conditions
3.3.1

Requirements for power supply / mains supply system

Power supply mains
Inductance 
(sum of mains inductance
and mains choke inductance)
7)
Mains inductance
Rated power supply voltage/frequency
(U ) device
AC
Power supply voltage

1) 2)
Absolute minimum
1) 2)
Absolute maximum
Absolute frequency minimum
Absolute frequency maximum
Overvoltage category
EN 61800-5-1, chapter 4.3.6
Harmonic frequencies (power supply voltage)
EN 61800-3, chapter 5.2.1, class 3
Power supply voltage asymmetry
EN 61000-2-4, table 1, Class 3
Commutation notches
EN 61800-3, chapter 5.2.1, class 3
Voltage drops
EN 61800-3:2004 and A1:2012
Voltage changes/fluctuation
EN 61200-2-4, class 3
Max. short circuit current power supply
3)
Control voltage (U
DC
according to EN 61131-2:2008
44
Instruction handbook b maXX 5000
Document No.: 5.09021.16
of 328
BM50XX - XTXX /
BM51XX - XTXX /
BM50XX - XIXX /
BM50XX - XGXX /
BM50XX - XT.../XI.../XG...
BM51XX - XT.../XI.../XG...
BM503X - XR.../XS.../XW...
BM504X - XR.../XS.../XW...
1) 2)
(U ) device
AC
(U ) device
AC
5)
5)
4)
)
6)
- XRXX Industrial system, with direct or low
6)
- XRXX impedance grounded neutral point
(TN system or TT system)
- XSXX Industrial system with not grounded or with
high impedance grounded neutral point
in addition TN or TT system
- XWXX Industrial system, with direct or low
impedance grounded junction of phases
in addition TN system, TT or IT system
BM50XX
BM51XX
area < 250 % x degree
+10 % to -15 %, for a duration of b 1 min
(IT system)
(grounded delta wye)
u = 2.4 %
k min
u = 4 %
k max
u = 0.5 %
k min
3 x 400 V
50/60 Hz
3 x 207 V / 50/60 Hz
3 x 528 V / 50/60 Hz
3 x 360 V / 50/60 Hz
3 x 528 V / 50/60 Hz
47 Hz
63 Hz
III
THD b 12 %
U
Max. 3 %
Notch depth < 40 %,
1)
10 % to 80 %
+/-10 %
50 000 A
+ 24 V -15 % / +20 %
Baumüller Nürnberg GmbH