Mounting Of The Dc Link Bar - Baumuller b maXX 5000 Series Instruction Handbook Manual

6.3
Mounting instructions
6.3.3

Mounting of the DC link bar

Observe the following items when mounting the DC link bar:
m Position of the chamber-bevel (detail Y)on bottom
Figure 46:
m Distance bushing and neck collar screw
Figure 47:
116
Instruction handbook b maXX 5000
Document No.: 5.09021.16
of 328
Position of the screw thread (detail Z) on top. 
The correctly mounting of the distance bushings makes it easier to disassemble the
unit in case of service and ensures the captivity of the distance bushings. 
Neck collar screw (1)
DC link bar (2)
Distance bushing (3)
BM5XXX DC link terminal (4)
Correctly mounted DC link bar
It is recommended to assemble the neck collar screw and the distance bushing to the
DC link bar before mounting the DC link bar. The correctly mounting of the distance
bushings makes it easier to disassemble the unit in case of service and ensures the
captivity of the distance bushings.
WRONG
Mounting of the neck collar screw
CORRECT
Baumüller Nürnberg GmbH