Mounting With Mounting Rail; Mounting Instructions For The Bm51Xx And Bm53Xx, With Mounting Rail - Baumuller b maXX 5000 Series Instruction Handbook Manual

6.3
Mounting instructions
6.3.1

Mounting with mounting rail

After attaching the mounting rail, push the device from below beneath the upper fastening
bolts (1). Then, tilt the device on the mounting plate (2) and slide onto the mounting rail
(3). Finally, tighten the upper fastening and grounding bolts (4).
Figure 44:
Device
A - screws
B - washers
C - screws
D - Mounting rail 1000 mm
1)
Number n depends on the length of the mounting rail
114
Instruction handbook b maXX 5000
Document No.: 5.09021.16
of 328

Mounting instructions for the BM51XX and BM53XX, with mounting rail

BM50XX-S BM517X-S
2 x M5 3 x M5
2 x (5.3 x 10) 3 x (5.3 x 10)
Refer to Accessories and Spare Parts
BM519X-S
8 x M5
4 x (5.3 x 10)
1)
n x M5
ZMounting rail– as from page 287
Baumüller Nürnberg GmbH
BM532X-S
BM533X-S
2 x M5
2 x (5.3 x 10)