Drilling Pattern - Baumuller b maXX 5000 Series Instruction Handbook Manual

6.2.1

Drilling pattern

Use the drilling pattern to make the necessary drill holes/cutout sections.
NOTE!
Consider the minimum clearances for cooling when making the drill holes.
All dimensions in millimeters [mm].
Further notes see
How to determine the required space in the control cabinet, see
page 29.
Tolerance 
specifications
Drill hole dimensioning
Dimensioning openings
Relative tolerance of discretionary divisions
For air-cooled 
For BM50XX-S, BM51XX-S, BM53XX-S only!
versions:
*: Relative tolerance of discretionary divisions: ±0.1 mm
Figure 42:
ZDimensions–
Drilling pattern with mounting rail for BM50XX-S, BM53XX-S, BM51XX-S
as from page 29 and ZCooling–
±0.2 mm
+1.0 mm
±0.1 mm
Instruction handbook b maXX 5000
Document No.: 5.09021.16
6
Mounting
as from page 56.
ZDimensions– as from
111
of 328