Mounting Instructions - Baumuller b maXX 5000 Series Instruction Handbook Manual

NOTICE!
Property damage due to overheating.
Scratches and burrs can inhibit the heat dissipation of cold plate devices.
Therefore
m When mounting cold plate devices, ensure that the surface quality of the mounting
6.3

Mounting instructions

There are different mounting procedure.
Each mounting procedure is described in a drawing (see
ZFigure 45–
The screws and washers required for mounting are listed beneath the respective drawing.
Carry out mounting as follows:
1 Provide suitable transport/lifting equipment as needed.
2 Keep suitable fastening components readily available.
3 For cold plate devices
4 Mount the device.
5 Subsequently connect the water-cooling unit.
plate meets the specifications and ensure that the device's rear panel/mounting
plate does not have any scratches or burrs.
on page 115).
n check the surface quality of device's rear panel/mounting plate, see
data of the mounting plate for cold plate–
ZFigure 44–
on page 112
Instruction handbook b maXX 5000
Document No.: 5.09021.16
6
Mounting
on page 114 and
ZMechanical
113
of 328