Connection Diagrams; Connection Diagram Of Bm50Xx-Xx0X - Baumuller b maXX 5000 Series Instruction Handbook Manual

7.13 Connection diagrams

The connection diagrams are separated in connection diagrams for the electrical mains,
motor etc.,
NOTE!
The identifiers 1C1 and 1D1 were taken over from DIN EN 60445. 1C1 is the connec-
tion to the positive DC link cable/bar, and in the past was identified by Baumüller in
some devices as ZK+. 1D1 is the connection to the negative DC link cable/bar, and
in the past was identified by Baumüller in some devices as ZK-.
7.13.1 Connection diagram of BM50XX-XX0X-... mains rectifier without safety function
NOTE!
Description of BM5030 with safety function
see
BM50XX-XX00 Normally open contact expected on the inhibit input.
Figure 64:
Zpage 145– and the front side connections
ZC.5 Connection diagram BM5030 with safety function–
Connection diagram for the BM50XX-XX00 without safety function
Zpage
BM5030-XX2X-...
Instruction handbook b maXX 5000
Document No.: 5.09021.16
7
Installation
171–.
as from page 308.
External brake
resistor
NOTICE:
Connection for
external brake
resistor, only.
Do not connect
an additional
capacitance.
143
of 328