Time Slot Assignment Condition; Time Slot Allocation For Cct Blade - NEC UNIVERGE SV9300 Networking Manual

TIME SLOT ASSIGNMENT CONDITION

Time Slot Allocation for CCT Blade

On each CCT blade, the system recognizes the lowest and highest channel numbers to which trunk num-
bers are assigned, and allocates time slots to all the channels between them. If trunk numbers are assigned
to nonconsecutive channels, the system also allocates time slots to channels not assigned.
For example, as shown below, when Channel 1 through Channel 10 have been assigned by system data
programming except Channel 5, the system allocates a total of 10 time slots for all ten channels. Therefore,
to avoid allocation of unnecessary time slots, it is recommended that consecutive channels be assigned on
each CCT blade.
Time Slot Allocation for CCT
10 DXXX
9 DXXX
6 DXXX
5 NONE
4 DXXX
1 DXXX
CH0 NONE
1-8
Chapter 1 CCIS FEATURES
TIME SLOT ASSIGNMENT CONDITION
HIGHEST CHANNEL
10 TIME SLOTS ARE
ALLOCATED EVEN
WHEN CH5 IS NOT
ASSIGNED.
LOWEST CHANNEL
NWA-088654-001 Rev.1.0
94ch1001.fm